T1,t2,t3 marked red on overhead map pine trees to be crown reduced on Appleton crescent side only to clear overhang off driveway to be pruned by 2 metres to keep the trees balanced while giving adequate clearance from their property, t4 silver birch is to pruned by 1.5 metres on Appleton crescent side only and crown lifted to 5 metres to give 2 metres clearance from garage roof, reasons for works are to prevent debris on cars and property roof both housing groups at the back have gave consent for these works to be done.

23/00006/TPO (T1) My client is wishing to extend his current gravel driveway in line with sketch plans provided using heavy duty weed control membrane and covering off 20mm golden flint gravel to the whole area, this would be into the RPA of the adjacent T1 oak tree which measures for tree of 97cm diameter at 1.5m (0.97 x 12) = 11.6m radius, the measurements for driveway are 7.4 metres away from the front door in line with golden shrubbery border as per photos and from corner stone off current driveway to front garage door 6.25 metres away in a curve, driveway would be dug down by hand under arb supervision and dug down to remove top soil to a maximium depth off 300mm, any roots exposed larger than 25mm would be covered by the membrane and then by 20mm golden gravel to match previous driveway as per photos smaller roots would be pruned under guidance if required.

06/00279/TPO (W1) - Lime - Crown thin by 15% of canopy volume. Crown lift to provide a 3 metre vertical clearance above roof of garage. Maple - Fell

06/00105/TPO (W11) - T1 - Swedish Whitebeam (next to garage of 21 Dippons Mill Close) - Crown reduce by up to 1 metres to reshape and balance. Crown lift to 2.5 metres. Reason: to provide appropriate clearance above garage and over garden. T2 - Ash (nearest 21 Dippons Mill Road) - Reduce height by up to 3 metres and reduce overhang over garden / house of 21 Dippons Mill Close by no more than 2 metres. T3 - Ash - Crown reduce branch overhanging road back to appropriate pruning point at the boundary between the lawned area and the pavement. Reduce by no more than 2 metres in height. Beech (Rear garden of 21 Dippons Mill Close) - Prune branches growing 'in front' of holly tree by 2.5 metres back to appropriate pruning points in accordance with BS 3998.

Oak - Crown reduce lateral branches by no more than 1.5 metres, crown lift by the removal of secondary branches only to provide a maximum clean race of 2.5 metres from garage structure in garden of 38 Castlecroft Gardens. N.B. Notice of intentions submitted by owner of 38 Castlecroft Gardens

Reduce conifer tree next to garage by one third of existing height.

Triple stemmed Sycamore - Remove. The tree is about 14m tall and has been previously crown reduced at about 7m. There is bark inclusion between each of the stems that prevents strong unions and increases the risk of failure of 1 or more of the stems which is possibly a reason why the crown has been previously reduced to lessen the sail area. The tree is 3.75m from the side of the applicant's garage where there are 4 vertical cracks running the full height of the internal skin, 1 crack is about 15mm wide. No exploratory work has been carried out to ascertain the cause of cracking but there is a good chance that the tree is implicated. It is considered that the Sycamore does not have any significance in the conservation area or to local amenity generally. Ongoing cyclical reductions of the tree to maintain its safety is not considered to be cost effective when removal will not cause any significant detriment to amenity. The applicant is willing to plant a replacement tree elsewhere in his garden in a position that will allow its full and maintenance free development.

06/00399/TPO (T1-T4) - T1 - Crown lift by the removal of secondary branches only to provide no more than 5 metres clearance above ground level; T2 - Crown lift by the removal of secondary branches only to provide no more than 5 metres clearance above ground level; T3 - Crown lift by the removal of secondary branches only to provide no more than 5 metres clearance above ground level. Prune (back to appropriate pruning points) to provide a maximum of 2 metres clearance from any part of the adjacent garage (5A) or house (5); T4 - Crown lift by the removal of secondary branches only to provide no more than 5 metres clearance above ground level. Prune (back to appropriate pruning points) to provide a maximum of 2 metres clearance from any part of the adjacent garage (5A) or house (5). Remove lowest 'dog leg' branch on garage (5A) side back to main stem. Reasons for works - Ongoing maintenance and pruning to provide appropriate clearances from ground and structures.

06/00045/TPO - T3 - Beech - Crown lift over driveway to 4 .5 metes and prune back lateral growth from the structure of the building back in line with previous pruning points. T8 - Pine - Crown lift to provide 5.5 metres clearance over highway; Copper beech adjacent garage block - crown lift by the removal of secondary and tertiary branches only to provide no more than 2 metres clearance above roof of garage block. reduce length of lowest branches extending over roof of garage block in a southerly direction by no more than 2.5 metres. (N.B. Tree numbers refer to tree identification on application form. Trees identified on form, but nor listed in description were found not to be protected by the TPO, or works did not require permission.)

Sycamore - Remove rear stem growing toward garage strucutre, and crown reduce remiaing tree by up to one-third.