T1,t2,t3 marked red on overhead map pine trees to be crown reduced on Appleton crescent side only to clear overhang off driveway to be pruned by 2 metres to keep the trees balanced while giving adequate clearance from their property, t4 silver birch is to pruned by 1.5 metres on Appleton crescent side only and crown lifted to 5 metres to give 2 metres clearance from garage roof, reasons for works are to prevent debris on cars and property roof both housing groups at the back have gave consent for these works to be done.

06/00279/TPO (W1) - Lime - Crown thin by 15% of canopy volume. Crown lift to provide a 3 metre vertical clearance above roof of garage. Maple - Fell

06/00045/TPO - T3 - Beech - Crown lift over driveway to 4 .5 metes and prune back lateral growth from the structure of the building back in line with previous pruning points. T8 - Pine - Crown lift to provide 5.5 metres clearance over highway; Copper beech adjacent garage block - crown lift by the removal of secondary and tertiary branches only to provide no more than 2 metres clearance above roof of garage block. reduce length of lowest branches extending over roof of garage block in a southerly direction by no more than 2.5 metres. (N.B. Tree numbers refer to tree identification on application form. Trees identified on form, but nor listed in description were found not to be protected by the TPO, or works did not require permission.)

06/00616/TPO (G2 & T24) - Lime - Prune back to previous pruning points and remove secondary branch (identified by dashed red line on attached photo) growing toward adjacent tree in group (T1 in this application); Trees in Group across rear fence (T1 - T4 as viewed left to right form house) - T1 - Reduce exaggerated vertical growth stem to appropriate pruning point to bring is back into the general crown line, and Crown reduce the remaining tree to appropriate pruning points by a maximum of 1 metre of overall crown spread to rebalance; T2 - Either fell or crown reduce the radial spread by no more than 1 - 1.5 metres; T3 - Crown reduce radial branch spread by up to 1.5 - 2 metres and prune by removing secondary branches only to provide a 1.5 metre vertical clearance above the garage roof; T4 - Crown reduce radial branch spread by up to 1.5 - 2 metres and prune by removing secondary branches only to provide a 1.5 metre vertical clearance above the garage roof.