Reduce back to clear building by 3 metres as overhanging and to complete essential works to roof x 1 Ash (T1)

Remove young branches within 1000mm of house roof to stop growing into tiles and gutters x 1 Magnolia tree (A), remove as growing through staircase to allow staircase to be rebuilt x 1 Ewe tree (B)

Prune back 2-3 metres near boundary due to branches causing damage to roof tiles x 1 Lime (T1)

Crown thin by 10% to achieve a more uniform lighter crown density and minor tip reduction on lower growth extended towards house roof of around 1 metre to improve crown balance, work is designed to create a more even crown density x 1 Copper Beech (T1)

Crown and reduce in height to give a 2 metre clearance from roof x 1 Ash (T1) crown and reduce by approx 5-7 metres in order to maintain a viable reshape x 1 Sycamore (T2)

Reduce branches on the western side of the tree by a maximum 3m and these branches should be reduced in proportion (higher branches being reduced less) to a maximum height of 10m to reduce likelihood of damage to roof x 1 Sycamore (T1)

Crown reduction of approx. 2.0 -3.0m to clear branches from near roof x 3 Beech (T1 - T3), prune back overhang by 2.5 metres to create more light x 1 Beech (T4), x 1 Oak Tree (T5) and x 1 Willow Tree (T6)

Reduce back from front elevation by 1-1.5m back to suitable union and lift by approx. 3m above gutter line to carry out urgent roof remedial works x 1 Norway Maple

Prune branches to 1 x Beech (T1) to clear the apex of the garage roof by 1-2 metres

Crown reduce height and spread by up to 2 metres, crown lift to remove all branches below 3 metres to main union and lift branches to give 2 metres clearance over roof and garages to Sycamore (T1) for tree maintenance