Remove two limbs that fused together that are prone to disease and raise crown by approx 1-2m x 1 Beech

Reduce height by 3 metres and reduce lateral growth by 2m on all sides x 1 Horse Chestnut (T2), remove basal growth and 2 x errant limbs over car park (their stems originate from ground level) x 1 Sycamore (T12), remove basal growth x 1 Sycamore (T13) and remove basal growth and prune laterally on building side by 2.5m x 1 Yew (T14)

Reduce canopy that leans towards neighbouring property by approximately 2m reducing weight, whilst allowing the tree to remain x 1 Scots Pine (T1), fell as has heavy lean x 1 Scots Pine (T3), fell as canopy is deteriorating with approximately 1/3 completely dead x 1 Cypress tree (T4), reduce back approx 3m to the boundary line x 1 Ash (T5), fell as root plate has heaved x 1 Hawthorn (T6), crown reduce by 2.5 metres controlling the size and spread of the tree x 1 Hawthorn (T7) and remove one dead stem x 1 multi stemmed Cherry (T8)

Crown lift to 4m from ground level x 1 Yew (T2), crown lift to 4m x 1 Conifer (T3), prune over extended lateral branch back by approximately 3m x 1 Cotoneaster (T4), remove limb growing through T3 (Yew) as it is having a negative impact on the form of the Yew x 1 Ash (T5), hedge cut back to formal shape by 0.5m to 1.0m x 1 Conifer (T6), prune back to formal shape by 0.5m to 1.0m x 1 Hawthorn (T7) and reduce back branches to give a 2m clearance from the gutter x 1 Yew (T8)

Reduce overall by 4m leaving a 4m crown and shape accordingly x 2 Ash trees (G1)

Reduce by approx 3m & shape, 2m on sides to provide sufficient clearance from the house, garage and the road x 2 Yew (T1 & T2)

Fell tree to ground level as tree has been slowly dying over the last few years it is now coming to end of life and in poor condition x 1 Walnut (T1)

Crown reduce the whole tree to remove around 2 m from the crown spread and 1.25 m from height to ensure no overhang to the roof and a minimum 1.5 m clearance from the neighbour's property x 1 Cherry (T1)

Crown lift to remove all foliage up to approximately 5m at crown break, or where stem bifurcates and thin remainder of canopy by approximately 20% by removing larger of the regrowth stems x 1 Lime (T1)

Crown reduction of up to 4-5m, with final cut diameter not exceeding 80-100mm x 1 Lime (T1), Crown Lift to provide 4 metres clearance from ground level to enable vehicles to pass under x 2 Lime & x 3 Douglas Fir (T2 - T6) and reduce very top of the tree by 4 metres in length to minimise risk of failure in future x 1 Douglas Fir (T7 adjacent to the outbuilding). Crown reduction of approximately 1.5m to T8 Oak to improve form an enable unhindered passage along the drive.