Crown reduce the whole tree to remove around 2 m from the crown spread and 1.25 m from height to ensure no overhang to the roof and a minimum 1.5 m clearance from the neighbour's property x 1 Cherry (T1)

Cut back 2 overhanging main branches to trunk, cut back small overhanging branch near property roof by approximately 1 metre x 1 Weeping Birch (T1), reduce back overhanging branches to previous points at property boundary, approximately 1 metre x 1 Plum (T2), reduce back overhanging branches to previous points at property boundary, approximately 1.5 metre x 2 Lilac (T3 and T4) and reduce back overhanging branches to previous points at property boundary, approximately 0.5 metre and reduce height to maintain shape, approximately 0.5 metres x 3 Plum (T5 - T7)

Remove to ground level as dead x 2 trees (T1 & T2), remove low limb that extends over glass house and tip reduce mid crown laterals above glasshouse by 1 metre in order to allow light to glasshouse for growing plants and reduce risk of damage x 1 Robinia (T3), remove tree as unsafe due to severe basal decay x 1 Silver Birch (T4), and reduce limb extended over garden building by 2.5 meters and prune elsewhere to ensure 1.5 metre clearance over roof x 1 Beech (T5)

Prune back secondary branches over building roof to source to give 2m clearance x 1 Ash (T1) and x 1 Plum (T2)

Reduce height by approximately 10ft, reduce over extended side laterals to shape by 1.5m to 2.5m x 1 Macrocrarpa (T1) and reduce back side laterals by 1.5m to 2.5m over hanging adjacent properties roof x 1 Macrocrarpa (T2)

Prune back to boundary x 1 Ash by side lateral reduction of the branch length back to previous pruning points and lift from over the garden to a height of approximately 8-10 metre. Yew tree cut back from the roof and chimney to allow approximately 1 metres clearance

Reduce crown by 3m x 1 Arbutus unedo (T1), reduce crown by 2m x 1 Magnolia tree (T2), reduce height to height of neighboring property to roof level x 1 Conifer tree (T3), reduce height by 3 m x 1 Holly tree (T4) and reduce height of x 1 conifer tree by 4m (T5)

Remove x 1 Blue Atlas Cedar (T1), x 1 Scots Pine (T2), x 3 Cherry (T4, T5, T7), x 1 Leyland Cypress (T6), x 1 Larch (T8), raise the crown to around 4 meters and prune the radial spread across drive to remove around 1.5 metres x 1 Cherry (T3), crown lift by 3 metres x 1 Yew and x 1 Holly (GP9), remove 3 x stunted stems x 1 Holly (T10) and remove low growth over roof to provide a minimum clearance of 1 metre

Reduce back by 1.5m x 1 Crab Apple (T3), crown reduce by 1.5m x 1 Purple Plum (T4), fell x 1 Cherry (T6), crown lift by 1.5m x 1 Rauli (T10), reduce the lowest lateral limbs by 2m x 1 Beech (T13), crown lift by 5.3m x 1 Horse Chestnut (T22) and crown lift by 5.3 metres and reduce back off the church roof by 1.5m x 1 Sycamore (T23)

Crown lift by side lateral reduction of the branch length by approximately 3-3.5m from over the roof to allow a clearance of approximately 1-1.5 metres back to a suitable branch union from the front elevation and approximately 2 metres above the roof area also lifting the lowest branches from over the parking area to allow 5-6m and also some secondary branches away from overhead cables clearance from ground level to Beech (T2).