Reduce the lateral spread of the tree by 2-2.5 metres to provide clearance to the house, garage and over the neighbours garden this is to manage the tree's size for its location x 1 Sycamore (T1)

Remove young branches within 1000mm of house roof to stop growing into tiles and gutters x 1 Magnolia tree (A), remove as growing through staircase to allow staircase to be rebuilt x 1 Ewe tree (B)

Reduce by up to 5m of regrowth only, back to suitable growth points ensuring that historic pruning points and knuckles are retained x 1 Ash (T1), Reduce crown by approximately 8 metres in height of the taller stems to stabilise compromised structural integrity of hollowing main stem, reduction of remaining smaller stems by 2.5 metres to maintain a balanced crown formation whilst retaining as much photosynthetic producing material to aid with wound wood response x 1 Ash (T2), Reduce height and lateral spread by approx of 2-3 metres in height & 2-3 metres of lateral spread effectively making a communal crown profile to lessen dynamic loading from new wind forces x 1 Ash (T3) and prune back from house side and neighbouring house back to points of previous pruning approx 2 metres, raise low branches over road and garden to contain tree x 1 Oak (T5).

Reduce by 2 - 3 metres, thin by 15 - 20% and crown lift by 1 - 2 metres to create more sunlight and branches overhanging house x 1 Oak

Crown thin by 10% to achieve a more uniform lighter crown density and minor tip reduction on lower growth extended towards house roof of around 1 metre to improve crown balance, work is designed to create a more even crown density x 1 Copper Beech (T1)

Reduce the spread towards the house by 1.5-2.5 meters and reduce and/or remove all lower branches to raise the crown of the tree to 6 metres to maintain shape and size x 1 Oak (T1)

Trim back two limbs by 2m to match old cuts on near by limbs maintaining a natural shape (pointing approx SE) which overhang the house, trim back to match old cuts by 3m limbs (pointing approx W) to give more light to the back garden x 1 Oak (T7), pollard back to old cuts and reshape the brushwood over public footpath by trimming back by 1.5m x 1 Sweet Chestnut (T8) and re-pollard back to old cuts and remove old knuckle if not sound to give more light to the back garden x 2 Sycamore (TA & TB)

Tip reduce top down by approximately 3 metres and side laterals by up to 2 metres, crown lift to 4 metres to allow more light through to house and garden area x 2 London Plan (T1 & T2)

Reduce overextended branches by 2-3 metres to improve the shape of the trees and increase clearance to the house. Raise the lower branches to 5.5 metres to maintain clearance over the road and thin the crown by 10% to remove any crossing branches x 2 Beech (G3)

Reduce lateral branches from the house by 2-3 meters to give clearance to the house and include reducing the spread on the other side of the tree to balance the crown x 1 Sycamore (T1) The tree will be pruned to secondary and tertiary points in line with BS3998