Erection of single storey rear extension, garden outbuilding/home office and detached car port, associated works, alterations to roof, boundary wall and vehicular access

Amendments to planning permission dated 16 April 2021 (RN: 20/08318/FULL) which itself varied condition 1 of planning permission dated 18 December 2020 (RN: 20/02660/FULL) for partial demolition including the front & rear facades, sixth floor and structures at seventh floor; replacement frontages; rear extension, rebuilding of the sixth floor and a seventh floor extension for office use (Class B1); creation of a restaurant / café unit (Class A3) at part ground floor; flexible office (Class B1) or non-residential institution use (Class D1) at part ground floor; assembly & leisure unit (Class D2) at part ground and lower ground floor levels; landscaping and a new boundary wall to the rear; external terraces; rooftop plant enclosure; rooftop PV panels and associated external works. Namely, relocation of Emergency Generator Flue, to terminate on first floor extension roof instead of level 8.

Change of use of building from Use Class B8 to provide ground and first floor flexible commercial floorspace as office, cafe or restaurant use (Class E) and second to fifth floor as office use (Class E); the erection of a five storey rear external core; raising of existing roof profile; construction of east and west dormer windows; change of southern hip roof slope to gable end; installation of a roof level plant screen to the new gable end; the insertion of new window apertures to the existing Loman Street façade; refurbishment or replacement of east and west elevation windows; replacement of loading doors to east and west elevations; partial lowering of courtyard area with relaying of granite setts; amendments to east elevation ground floor doorway; and associated works including changes to boundary treatment.

Non-material amendment to condition 2 (approved plans) of planning permission dated 18.08.2015 ref. 14/AP/2922 for: "Variation of Condition 2 (approved plans) of planning permission 12/AP/3558 dated 04/06/2013 for the 'Demolition of existing buildings and erection of a replacement building of five to eight storeys in height (max height of 27.5m), plus basement, comprising 53 residential units, 633 sqms of retail floorspace (Use Class A1) and 767 sqms of office floorspace (Use Class B1), disabled parking spaces and roof top landscaped amenity areas'. Proposed changes incorporate: - Alterations to internal floor plan layouts and core layouts. - Realignment of window and door positions to correct inaccuracies with plans. - Removal of brick pillars to balconies and provision of opaque glass balconies. - Increase in height of building by 150mm to accommodate lift overrun. - Increase in A1 floorspace from 643.2sqm to 721.9sqm. - Reduction in B1 floorspace from 670.3 to 645.64sqm. - Alteration to building line/arrangement at Ufford Street/Boundary Row junction." The non-material amendment comprises the extension of the existing plant enclosure located on the seventh floor of Block B to accommodate an additional condenser unit to support the operation of the commercial uses.

Erection of single storey extension to side, installation of 2 air source heat pumps to rear, replacement roof, replacement dormer windows and roof light to front, replacement windows to front and rear, rebuild existing chimneys, internal alterations and erection of infill to boundary wall at front following removal of gated access to allow conversion from Council offices to 5 flats with staff office for supported living, following demolition of garage (Amended Description)

Remove existing gazebo and construct new flat roof garage. Rear orangery and additional bedroom / office. New perimeter boundary wall.

Erection of a two storey front extension, rear conservatory and single storey rear extension, first floor rear extension, rear dormer, roof lights and gable projections to front roof slope, erection of a detached 2 storey outbuilding to provide games room, bar and pool area and conversion of existing garage to provide gym and home office (revisions to previously approved planning permission DA/21/00494/FUL) and implementation of front boundary wall.

Non-material amendment to planning permission 18/AP/3144 dated 4th July 2019 for 'Demolition of two existing buildings (Use Class C2) and erection of a part four, five and six storey multi-purpose building(maximum height of 23m), including basement, for offices (Use Class B1a) (6,747.3sqm GEA) and cafe (Use Class A3) (230.9sqm GEA), together with landscaping, boundary treatment, access and other associated works.' The amendment consists of design changes comprising the installation of a glass balustrade to 4th floor and roof levels and a bespoke glass access gate.

Conversion of existing outbuilding into home office to include re-roofing and installation of roofing membrane . Enlargement of existing opening and insertion of glazed panel. Re-reinstatement of gate to boundary wall.

Change of use from office use (Use Class E (B1) to residential (Use Class C3) with associated demolition of existing outbuilding, first-floor extension and single-storey flat roof extension, and part boundary treatments (walls and fences) to allow for the re-arrangement of external amenity areas and manoeuvrability of vehicles and alterations to existing access.