Demolition of existing shed. Erection of a single storey extension to existing rear outbuilding. Replacement of 1no. window with 1no. door to north west elevation. Alterations to existing outbuilding roof.

Tree 1 - Elm reduction by 25%, to bring canopy into the same shape as the elm behind (they share canopy shape). This is to allow more light to the plants and shrubs below, south Tree 2 - Eucalyptus, pollard to reduce height, straighten growth and bring away from shed roof, north

1. Buddleia- Fell and grind out stumps 2. Prunus species Fallen- Fell and remove stump, including all loose cuttings. 3. Laurel Neighbours- reduce overhang back by approx. 2m or to midway on shed roof. Tree Height 7m and crown spread 6m (Leaving as crown spread of 4m) 4. Goat Willow x 2 Repollard to previous points. Tree Height 9m and crown spread 5m. ( Leaving a height of 6m and spread of 4m).

SECTION 211 NOTIFICATION FOR WORKS IN A CONSERVATION AREA G1, Mixed Species - Remove dead stems from ivy clad hazel to approx. 500mm from ground level; maintain clearance of lower branches over the driveway to a height of approx. 4.5m from ground level and 0.5m from kerb line. G2, Mixed Species - Prune back low branches in contact with the wall, fence to maintain a clearance of up to 1.0m where possible; prune low branches over paths to statutory height of 2.5m from ground level; prune branches over property roof to achieve a clearance of approx. 1.5m, targeting secondary points of pruning (approx. 1.5m lateral growth); remove Elder growing close to the fence and treat stump. G3, Mixed Species - Reduce tops of the Yew by approx. 2.0m from highest apical tip; trim face next to the driveway; top Beech to points of previous pruning by removing approx. 3.0m in height to leave a finished height of approx. 2.5m from ground level; trim side lateral growth on the garden side. T1, Ash - Remove lowest x 2 branches growing over the vicarage roof to source; prune branches above the vicarage to maintain a clearance of approx. 2.0m from the roof by pruning back to secondary points of pruning. G4, Mixed Species - Prune back low branches in contact with the fence to source; prune overhanging branches back to party line along entire group, to the tops of the plants; remove Elder and rose growing on the vicarage side of the fence; prune back remaining Elders back to party line and away from the fence; prune Elder to clear BT cable. T37, Horse Chestnut - Remove chestnut growing next to the fence to approx. 50mm from ground level. T38, Ash - Remove major and moderate deadwood; prune secondary branch to reduce potential notch stress by drop crotch pruning longer lower branches (see photo). T39, Lime - Raise low branches to approx. 4.0m by removing branch over shed and x 2 over neighbouring fence to source; remove x 2 low branches towards the Ash to source; raise remaining branches to approx. 4.0m from ground level by targeting secondary points of pruning; remove basal epicormic and elder. T2, Indian Chestnut - Reduce limb to the Southwest growing towards the Lime, by approx 3.0m of lateral growth; remove elders from basal area. T45, Sycamore - Reduce regrowth where squirrel damage is compromising structural integrity; remove moderate and major deadwood; maintain statutory clearance over the tow path. G5, 8 x Yew, Hazel - Maintain statutory height clearance of 2.5m over the tow path; remove moderate and major deadwood over the tow path; remove cluster of hazel in the corner of the chain-link & wooden fence. T43, Sycamore - Remove major and moderate deadwood from over the footpath. T42, Sycamore - Remove major and moderate deadwood. G6, Laurel, Yew - Prune to maintain a clearance of approx. 1.0m from the fence where possible; this will not include whole tree removal unless stems are less than 75mm in diameter; maintain statutory height clearance over public footpath. T47, Sycamore - Remove some lower understory laurels to achieve a clearance of approx. 2.0m from the base of the tree. T3, Sycamore - Remove sycamore and identified laurel stem.

Change of use of existing church (Use Class F1(f)) into a 3-bedroom, 5-person dwellinghouse (Use Class C3), including insertion of 1no. side roof light, addition of 1no. door to side elevation, erection of a bike shed and bin store, and associated parking.

Replacement roof cladding including rooflights to north roofslope of agricultural building (cow cubicle shed)

T1- row of Laylandi and cypress to crown raise to 2-3 meters at rear of garden which is not in a conservation area T2- Reduce cherry by 1-2 meters T3- Poplar crown raise to 3 meters to allow clearance from shed roof T4- Budlia reduce to fence line which would be a couple of meters

Demolition of single storey brick built shed with slate roof

Non Material Amendment to previously approved application DC/23/1728 (Demolition of existing dwelling and erection of a replacement four-bed barn style dwelling with ancillary 3-bay cart shed garage) to omit the cladding to the south-west elevation of the approved dwelling; install 2no. windows to the south-east elevation to serve a garden room; alter the ground floor fenestration to the north-west elevation of the approved dwelling; install 2no. windows to the north-east elevation of the approved dwelling; install 3no. roof lights to the east and west elevations of the approved garage; install additional cladding to the east elevation of the approved garage; and relocate pedestrian door to north elevation of the approved garage

Varation of Condition 1 'Approved Plans' pursuant to planning permission ref no. 23/AP/1461 for the construction of a rear dormer roof extension to the main roof slope and over outrigger; including the raising of the roof ridge by 1.1.m and the contruction of a garden shed. Variation: Increase height of the boundary wall.