Variation of condition 2 (approved plans) of Planning Permission Ref: 20/02581/FUL (Erection of 2 x 3-storey terraces with roof top amenity space to provide 8 dwellinghouses and erection of a detached 2-storey building with basement to provide 130sqm of office (Use Class B1(a)) and a self-contained flat at first floor (Use Class C3), together with the provision of car parking spaces, cycle parking, refuse storage and landscaping. This application is a DEPARTURE APPLICATION: The proposed development is a departure from Policy E4 and Policy E7 of the London Plan 2021.) granted on 26.08.2021 Variation Sought: The revision is an alteration to part of the north facing wall of Block C at first floor level so that it is vertical on the boundary. The alterations are minor adjustments to remedy inconsistencies in the original design of the building known as Block C which consists of an office at ground and basement and an apartment at first floor.

Part full/part outline planning application for the development of the site comprising site wide infrastructure works including access from (and alterations to) Grange Road, internal spine road, earthworks and development plateaus, structural landscaping, utilities infrastructure, foul and surface water drainage infrastructure (including attenuation pond and outlets). Full consent sought for the erection of 5 employment units (totalling 2,719 square metres) comprising light industry (Class E(g)(iii)), general industry (Class B2) and/or storage and distribution (Class B8) floorspace and ancillary offices (Class E(g)(i)), including associated service yards and service vehicle parking, vehicular and cycle parking, boundary treatments and retaining walls, utilities infrastructure, foul and surface water drainage infrastructure and hard/soft landscaping. Outline consent (with all matters reserved except vehicular access from Grange Road and re-grading of site) sought for up to 4,000 square metres of floorspace for light industry (Class E(g)(iii)), general industry (Class B2) and/or storage and distribution (Class B8) employment floorspace and ancillary offices (Class E(g)(i)) and associated development including service yards and parking, plant, hard and soft landscaping (including boundary treatments and retaining walls), and drainage infrastructure and other associated infrastructure

Land South Of A127 East Of M25 Junction 29 Codham Hall Codham Hall Lane Great Warley Essex - Regulation 25 Submission: Brentwood Borough Council gives notice that further information has been submitted in support of the hybrid planning application with reference 22/00402/FUL, such further information seeking to remove the outline element of the application relating to the M25 to B186 link road (Phase 2) and making alteration to the application site boundary (to remove the outline element and land adjacent to Jax Folly). The following is the revised description of development for the application. Full planning application seeking detailed planning permission for demolition of existing buildings and structures; ground works to enable creation of development plots; highways works including construction of new A127 overbridge, access to B186, site roads and construction of M25 J29 to B186 link road (phase 1), erection of buildings for Class B8 (Storage and Distribution) and/or Class B2 (General Industrial) use within ancillary office space (within Class E); landscaping, infrastructure and enabling works including diversion of public rights of way. The further information relates to the Environmental Statement, including a Statement of Conformity Letter considering the implications for the changes to the red line boundary of the proposed development for the following topics: Socio-economics, Waste and Resources, Traffic and Transport, Air Quality, Noise and Vibration, Ground Conditions, Water Resources and Flood Risk, Ecology, Climate Change and Greenhouse Gas Emissions, Landscape and Visual Impact Assessments and Built Heritage.

Regulation 25 Submission: Brentwood Borough Council gives notice that further information has been submitted in support of the hybrid planning application with reference 22/00402/FUL, such further information seeking to remove the outline element of the application relating to the M25 to B186 link road (Phase 2) and making alteration to the application site boundary (to remove the outline element and land adjacent to Jax Folly). The following is the revised description of development for the application. Full planning application seeking detailed planning permission for demolition of existing buildings and structures; ground works to enable creation of development plots; highways works including construction of new A127 overbridge, access to B186, site roads and construction of M25 J29 to B186 link road (phase 1), erection of buildings for Class B8 (Storage and Distribution) and/or Class B2 (General Industrial) use within ancillary office space (within Class E); landscaping, infrastructure and enabling works including diversion of public rights of way. The further information relates to the Environmental Statement, including a Statement of Conformity Letter considering the implications for the changes to the red line boundary of the proposed development for the following topics: Socio-economics, Waste and Resources, Traffic and Transport, Air Quality, Noise and Vibration, Ground Conditions, Water Resources and Flood Risk, Ecology, Climate Change and Greenhouse Gas Emissions, Landscape and Visual Impact Assessments and Built Heritage.

Discharge Condition 10 (drainage strategy scross the whole site), Condition 12 (scheme detailing surface water interception and disposal methods, ongoing maintenance and management plan) and Condition 13 (scheme for connection to the main sewer for foul drainage) of planning ref: PF/20/1800 - Change of use of existing factory building from use class B2 (general industrial) to B1 uses (office, research and development) with ancillary stores and showroom and external alterations. Erection of extension to existing building to provide office space (B1 use) and additional factory space (B2 use) for manufacture, assembly, servicing, and testing of self-propelled crop sprayers. Erection of a new building for associated use as shot blasting and paint spray booth. Use of site area for product testing area. Formation of ancillary roadways, additional car parking, boundary fencing, landscaping and associated foul and surface water drainage.

Discharge of condition 14 (landscaping) of planning permission PF/20/1800 (Change of use of existing factory building from use class B2 (general industrial) to B1 uses (office, research and development) with ancillary stores and showroom and external alterations. Erection of extension to existing building to provide office space (B1 use) and additional factory space (B2 use) for manufacture, assembly, servicing, and testing of self-propelled crop sprayers. Erection of a new building for associated use as shot blasting and paint spray booth. Use of site area for product testing area. Formation of ancillary roadways, additional car parking, boundary fencing, landscaping and associated foul and surface water drainage)

Discharge Conditions 3 (materials & colour palette for external surfaces), 5 (contamination), 6 (monitoring & maintenance plan in respect of contamination), 7 (verification report), &14 (landscaping) of planning ref: PF/21/1800 (Change of use of existing factory building from use class B2 (general industrial) to B1 uses (office, research and development) with ancillary stores and showroom and external alterations. Erection of extension to existing building to provide office space (B1 use) and additional factory space (B2 use) for manufacture, assembly, servicing, and testing of self-propelled crop sprayers. Erection of a new building for associated use as shot blasting and paint spray booth. Use of site area for product testing area. Formation of ancillary roadways, additional car parking, boundary fencing, landscaping and associated foul and surface water drainage)

Temporary change of use from 21 August 2021 until 21 August 2022 from Use Class B8 (warehouse) and Use Class E (office and café) to a mixed use development including Use Class E (food market, sale of hot and cold food, co-working space, gym, barbers), Sui Generis uses (bar, cinema, events space), workings including the amended red line boundary, the erection of temporary canopy and other minor alterations incidental to the development.

Change of use of existing factory building from use class B2 (general industrial) to B1 uses (office, research and development) with ancillary stores and showroom and external alterations. Erection of extension to existing building to provide office space (B1 use) and additional factory space (B2 use) for manufacture, assembly, servicing, and testing of self-propelled crop sprayers. Erection of a new building for associated use as shot blasting and paint spray booth. Use of site area for product testing area. Formation of ancillary roadways, additional car parking, boundary fencing, landscaping and associated foul and surface water drainage.

Discharge of Conditions 3 (Testing and Validation of Imported Materials) and 6 (Tree Planting and Biodiversity Enhancement Measures) of Planning Permission reference DC/072506 for Elevational alterations to Dolphin House, including works to create a brick and glazed entrance area, insertion of doors, installation of externally mounted metal escape stair, new access ramp, new ballustrading to existing access ramp, siting of sprinkler tank and pump house upon area of car park, installation of roof mounted plant, including a 130 square metre plant area, hard surface landscaping, segregated recycling and waste management area, erection of boundary treatments, and associated works, in association with the use of the building for Use Class B1 offices, research and development, processes and ancillary functions.