Application under Section 73 of the Town and Country Planning Act 1990 to carry out development without compliance with Condition 1 (Approved Plans) of Planning Permission ref: 21/03750/FUL (Demolition of existing house and erection of three storey dwellinghouse (including accommodation in roofspace) and erection of new boundary fencing to left hand side and installation of new entrance gate) dated 26/01/2022. Variation to consist of the following changes by removing single storey room at rear, amendments to roof form of two storey front extension and alterations to the pitch of the main roof slope, including increasing the width of the rear dormer window and scale of the front dormer windows, alteration to window scale and detailing, adding obscure glazed windows to the side elevations, and materials to front and rear elevations; replacing the front side boundary on the right hand side; and addition of solar panels, and air-conditioning units relocated at high level towards the rear of the house.

Discharge Condition 10 (drainage strategy scross the whole site), Condition 12 (scheme detailing surface water interception and disposal methods, ongoing maintenance and management plan) and Condition 13 (scheme for connection to the main sewer for foul drainage) of planning ref: PF/20/1800 - Change of use of existing factory building from use class B2 (general industrial) to B1 uses (office, research and development) with ancillary stores and showroom and external alterations. Erection of extension to existing building to provide office space (B1 use) and additional factory space (B2 use) for manufacture, assembly, servicing, and testing of self-propelled crop sprayers. Erection of a new building for associated use as shot blasting and paint spray booth. Use of site area for product testing area. Formation of ancillary roadways, additional car parking, boundary fencing, landscaping and associated foul and surface water drainage.

Discharge of condition 14 (landscaping) of planning permission PF/20/1800 (Change of use of existing factory building from use class B2 (general industrial) to B1 uses (office, research and development) with ancillary stores and showroom and external alterations. Erection of extension to existing building to provide office space (B1 use) and additional factory space (B2 use) for manufacture, assembly, servicing, and testing of self-propelled crop sprayers. Erection of a new building for associated use as shot blasting and paint spray booth. Use of site area for product testing area. Formation of ancillary roadways, additional car parking, boundary fencing, landscaping and associated foul and surface water drainage)

Proposed extension to car park (new hardstanding area and associated drainage, some electric recharging points, walkways). Alterations to fencing and main access gate. Alterations at main entrance including the removal of planter and inclusion of cycle shelters. New connection footpath off site from gate to existing adopted footpath. Alterations to front perimeter of school to allow for 1.5m pathway. Removal of cobbles set in concrete around building. General tidying up of walkways adjacent to school. Removal of disused lamp posts and replace with solar powered lights. Development of all-year-round running track to perimeter of existing school field. removal of concrete blocks for development of outdoor gym (amended red line boundary 21.12.2021)

Discharge Conditions 3 (materials & colour palette for external surfaces), 5 (contamination), 6 (monitoring & maintenance plan in respect of contamination), 7 (verification report), &14 (landscaping) of planning ref: PF/21/1800 (Change of use of existing factory building from use class B2 (general industrial) to B1 uses (office, research and development) with ancillary stores and showroom and external alterations. Erection of extension to existing building to provide office space (B1 use) and additional factory space (B2 use) for manufacture, assembly, servicing, and testing of self-propelled crop sprayers. Erection of a new building for associated use as shot blasting and paint spray booth. Use of site area for product testing area. Formation of ancillary roadways, additional car parking, boundary fencing, landscaping and associated foul and surface water drainage)

Non-material amendments to permission 17/AP/4088 for 'Full planning permission for demolition, alterations and extension of existing buildings and erection of new buildings comprising a mixed use scheme providing up to 1,418 residential units, up to 3,436 sqm GEA of flexible Class A1/A3/A4 floorspace, up to 14,666 sqm GEA of flexible Class B1 floorspace, up to 869 sqm GEA of flexible Class D1/D2 and up to 3,311 sqm GEA of multi use floorspace (A1/A3/A4/D1) within Building BF-F, a new secondary school, in buildings ranging from 6 to 36 storeys in height as well as the creation of a single storey basement. The development also includes communal amenity space, landscaping, childrens' playspace, car and cycle parking, installation of plant, new pedestrian, vehicular and servicing routes, the creation of two new pedestrian routes through the Railway Arches and other associated works; and Outline planning permission (with all matters reserved) for the part demolition and part retention of existing buildings and erection of two new buildings comprising a mixed use scheme providing up to 130 residential units and up to 780 sqm GEA of flexible A1/A3/A4/D1/Sui Generis Uses and other associated works' to Plot BC-01, Building BC-6 ONLY (Compass School) comprising changes to the building fenestration, site fencing and approved floor plans including ground floor and roof access routes and confirmation of boundary line as per Development Agreement documents with a consequent update to condition 2 (approved plans).

Application for a Lawful Development Certificate for the proposed construction of front porch, alterations to existing window and door openings, insertion of new window and door openings, insertion of roof windows to rear roof slope, hardstanding and boundary fencing, and removal of lean-to extension from rear elevation.

Change of use of existing factory building from use class B2 (general industrial) to B1 uses (office, research and development) with ancillary stores and showroom and external alterations. Erection of extension to existing building to provide office space (B1 use) and additional factory space (B2 use) for manufacture, assembly, servicing, and testing of self-propelled crop sprayers. Erection of a new building for associated use as shot blasting and paint spray booth. Use of site area for product testing area. Formation of ancillary roadways, additional car parking, boundary fencing, landscaping and associated foul and surface water drainage.