Tree number - G1 Tree type - x2 Hazel (Corylus avellana) Approx Height - 5m Location - Front garden Right hand boundary Service - Prune Work required- reduce height down to approximately 3m, cut back to provide approximately 1m clearance from clients house Reason - as part of continued maintenance Tree number - T1 Tree type - Laurel (prunus laurocerasus) Approx Height - 1.5m Location - Rear garden left hand boundary near house Service - Prune Work required- remove dead section (see photos) Reason - section is near to dead Tree number - G2 Tree type - Laurel (prunus laurocerasus) Approx Height - 4m Location - Rear garden Rear boundary Service - Prune Work required- reduce height down to approximately 2.5m (gutter height of adjacent shed/garage Reason - as per clients wishes Tree number - T2 Tree type - Plum (prunus spp) Approx Height - 6m Location - neighbours tree, overhangs clients Rear garden Right hand boundary and clients Apple tree Service - Prune Work required- cut back to boundary the overhang to clients garden Reason - to reduce encroachment

Details of Condition 4. Tree protection as required by planning permission 22/AP/2987 dated 25/11/2022 for construction of a single storey rear extension with integrated canopy. Demolition of the existing shed and construction of a new shed building and bike store to the side. Facade alterations to replace the existing windows and cladding. Renovation of the existing porch/garage to include a new roof, cladding and glazing. Installation of two rooflights to the rear roof slope. Boundary alterations to continue the existing hit and miss brick wall. Excavation works to create a lower patio level linking the new shed building to the main house and minor landscaping works to reform the front and rear gardens.

Information to discharge conditions no3 (Materials), no4 (Drainage), no5 (Levels), no6 (Arbocultural method statement), no9 (Construction Management Plan) and no10 (Landscaping - softworks) of planning approval 23/0060/FUL - Erection of 1no dwellinghouse with attached garage to include air source heat pump and photovoltaic panels together with associated landscaping, boundary treatment, car parking and widening of existing entrance. Erection of detached summer house and shed. Removal and minor works to trees

Remove existing car port, erect single storey integral garage to side, convert existing integral garages to guest bedroom and gym, alterations to existing roof of workshop/storage shed to raise roof height and include flat roof to rear to include various internal and external alterations to include new tree planting following the removal of existing trees (Amended Plans Received 19/06/2023 showing replacement trees adjacent to the north east side boundary).

Erection of 1no dwellinghouse with attached garage to include air source heat pump and photovoltaic panels together with associated landscaping, boundary treatment, car parking and widening of existing entrance. Erection of detached summer house and shed. Removal and minor works to trees

G2 Cypress, holly, hawthorn trees (excluding horse chestnut) - Cut back to boundary line between properties in the form of a hedge, reduce back from garage/shed to give approximately 1m clearance. Fronting property (eastern boundary) 1. Willow tree, remove tree 2. 10 leylandii, reduce to approx. hight of 3m from ground level, crown lift by approximately 2m 3. Holly hedge maintain at approx. 2m Rear boundary (western boundary) 1. Cypress growing into neighbours property - remove tree 2. Cherry, crown thin to a max. 30%, crown clean 3. Cypress 3 trees- etiolated - remove trees 4. Cypress 3 trees - reduce by 3m Southern boundary Yew - reduce by 30% Laurel, holly elder hedge maintain at approx. 2m (see notification documents saved under 23/00750/TPO)

Extension 1. The application is for a renewal of an identical application that was approved in 2016. 2. The site currently accommodates a small house and two sheds. It is bounded by residential property on two sides, a paddock to the rear and is on the residential fringe of Westleton. The prevailing scale in the neighbourhood is varied with traditional one and two storey dwellings with one much larger property next door. 3. The existing house is to be extended to provide a single storey garage and an additional bedroom and ground floor bathroom to make the accommodation more modern and flexible. 4. The proposed dwelling will have no openings onto neighbouring properties and is screened by hedges and fences with the principal trees and boundary hedging and fencing being retained. 5. Highway access, bin and oil storage will be unchanged. 6. The exception is to increase the height of the existing perimeter willow fence to up to 3 meters (to graduate up after a minimum of 4 meters from the roadway) along the boundary between the cottage and the new building next door to improve privacy for both buildings following the new build increasing the land elevation in their back garden and increased scale of overlooking windows. 7. External materials are limited to brick and tiling compatible with local styles. 8. No biodiversity issues are presented by the proposals. 9. The site has been checked for contamination in 2017 and 2019 with no issues being found. 10. The site is not within a Conservation Area and the building is not listed.

Construction of a stand-alone shed for the purpose of timber drying and storage of timber, kayaks and garden equipment. The shed is rectangular in plan, 8.0 m by 3.0 m, with a pitched roof, overall height 2.97 m. In the interests of sustainability and economy, it will reuse the roof tiles and A-frames from an old garage elsewhere on the site, due for demolition. The roof is supported on timber columns. The timber columns and timber edging to the roof are painted black. The proposal includes continuing an 800 mm high earth bank along the boundary with the road, topped with a hedge.

Erection of a detached 3-bedroom house, access, parking, cycle store, sheds, new trees and soft landscaping, following the demolition of double garage, garden buildings, conservatory and timber panel boundary fences.

2.0 Due to crowding, subsidence and aging of the tree stock there is a need for extensive maintenance and remedial work in both properties. 2.1 Tree 11 Oak Tree at road frontage on property boundary. Reduce/nip lower crown limbs from power and BT Lines by 1m. Further raising of the crown to low hanging branches that obstruct access to both properties. Raising of crown by 1.5 meters 2.2 Tree 12 Ash tree felled and ground. Due to proximately to domestic oil tank, as the cause of the garage and garden workshop subsistence. This tree also has a 40cm deep cavity in the lower trunk and is shading better positioned trees. 2.3 Tree 13 Mulberry tree remove secondary limb, which over hangs outbuilding by approximately 3m. The tree has been pulled lower due to its growth away for the Ash Tree 12. 2.4 Tree 13A Fig tree removal from conservatory. 2.5 Tree 14 Liquid Amber crown lift /raise max 2m keeping shape. 2.6 Tree 15 Walnut remove all major dead wood. Remove two outreach branches that overhang neighbour properties and garden shed posing a property damage risk. 2.7 Tree 16 Dual trunk Ash with subsidence, fir a cable binding in the ash to protect trunks. 2.8 Tree 17 Overgrown laurel bring down to current hedge height. 2.9 Tree 18 Maple reduction of 30% of crown by 2m 2.10 Tress 19 two "bolus" Plums grown from old fruit root stock. Are now overgrown with cracks, breaks and dead. TO be felled and taken down to grown level. 2.11 Tree 20 Remove small secondary limb of sweet chestnut back origin. 2.12 Tree 21 Crown reduction of Ash by 2meters. 2.13 Tree 21A felling of two Hawthorn trees. Two trees just under the Ash labeled 21 in the plan