Discharge of conditions pursuant to NE/21/01012/LBC - Part demolition of rear flat roof extensions and erection of 2 storey rear extension; Alterations to front door and windows; Internal works to allow for the change of use from offices to part retail and part residential (Revised resubmission to NE/21/00340/LBC). Condition 3 - Windows and doors full details - scale drawings, cross sections and details of colour/finish. Condition 4 - external joinery details including windows and doors. Condition 5 - mortar composition and sample (hydraulic lime mortar)

Change of use of rear part of the basement and ground floor level from retail (Class E(a) into a two bedroom self-contained residential flat (Class C3); erection of a single storey rear extension to the rear and side of the existing back addition; installation of new bi-folding doors to replace the existing window and door at ground floor level to the rear elevation; partial demolition of the ground floor back addition to allow the creation of new door and window openings; lowering the floor level of the basement floor, formation of a new rear lightwell and erection of new external steps from basement to ground floor level at the rear of the property; alterations to existing shopfront to include replacement of existing doors and installation of 3no new doors for retail and residential entrances.

Discharge of conditions pursuant to NE/21/01011/FUL. Change of Use from offices to part retail and part residential (3 apartments); Part demolition of rear flat roof extensions and erection of part single storey part two 2 storey rear extension; Alterations to front door and windows (revised resubmission to NE/21/00339/FUL) Condition 6 - details of the timber refuse store shown on the Proposed Site Plan ref. 20-098-01 Rev. A, to include the material, colour and measurements/elevations.

Discharge of conditions pursuant to NE/21/01012/LBC. Part demolition of rear flat roof extensions and erection of 2 storey rear extension; Alterations to front door and windows; Internal works to allow for the change of use from offices to part retail and part residential (Revised resubmission to NE/21/00340/LBC). Condition 3 - Window and door details including scale drawings, sections and finishes. Condition 4 - external joinery details including windows and doors Condition 5 - Mortar composition details for bedding and pointing stonework. Sample to be submitted.

Application to approve details reserved by condition 3 (samples of materials) of 19/03508/FULMAJ - Demolition of rear extension; Refurbishment and retention of ground floor A1 retail uses, conversion of first floor and erection of roof extension to form 14no. apartments, including alterations to fenestration and addition of external lighting.

Variation of Condition 1 of planning permission dated 04 September 2020 (RN: 20/03854/FULL) for, 'Demolition and replacement of existing fourth floor, demolition of existing plant room, and erection of a single storey roof extension at fifth floor and rear extension at second to fifth floor levels in connection with existing office (Class B1) use, provision of new main office entrance, flexible use of part ground and basement floor for either retail or office use (Class A1/B1), creation of roof terrace at fifth floor level, provision of cycle parking spaces and facilities, roof plant and associated external alterations, including replacement windows'; NAMELY, to amend the approved drawings to replace a single ground floor level window on the north elevation with a door and to erect of a bridge over the existing lightwell to provide a secondary fire-protected egress point.

Observations on a proposed development within the adjoining Borough of Southwark with respect to 'Variation of condition 1 (Approved plans) of planning permission 16/AP/2511 (a variation of permission 13/AP/0561 for Redevelopment of the site including the demolition of existing depot building and erection of four new residential buildings of between six and nine storeys accommodating 69 dwellings and 137m2 of Class A1/A2/A3 space (retail/services/cafe), 9 disabled car parking spaces, cycle parking, private and communal amenity space including a new public square and landscaping, plus refurbishment and single storey extensions to the existing Bethwin Road playgroup building (Class D1 use) with associated landscaping comprising: Amendments to the building footprints and facades to blocks 2, 3 and 5 including: Regularising the as built block heights; Amendments to the footprints to incorporate non-combustible insulation and cavity barriers; Regularising the as built alignment and size of windows; Regularising the as built ground floor ancillary areas; Removal of existing brickwork, provision of fire rated insulation, cavity barriers, closers and re-cladding of the buildings with brick. - Minor changes to architectural expression, including alignment and size of windows; - Revised balcony design and sizes; - Retail space switches from Block 3 to Block 5 - Reduction in amount of accessible roof terraces; - Updated technical studies including daylight, sunlight and energy - Amendments sought to Blocks 2, 3 and 5 including the footprint of the external walls to extend outwards by 65mm and parapet heights adjusted in accordance the as built survey.' At: Land East Of Crown Street Between Wyndham Road And Bethwin Road Including The Former Crown Street Depot And The Bethwin Road Adventure Playground Crown Street Camberwell Application No. 22/AP/1818

Change of use from part retail (Class E) and part residential (Use Class C3) to a standalone casting studio/office (Use Class E) at ground floor level and a two bedroom flat (Use Class C3) above; erection of an additional floor at roof level with solar panels; formation of a roof terrace on top of the existing back addition at second floor level; demolition of existing single storey garage and erection of a part single part two storey side and rear extension; installation of air source heat pump to side elevation of back addition; replacement windows to front, side and rear elevations; installation of new shopfront; associated landscaping and alterations to the existing Waldo Road facing boundary treatment (Revised description).

Non-material amendment to condition 2 (approved plans) of planning permission dated 18.08.2015 ref. 14/AP/2922 for: "Variation of Condition 2 (approved plans) of planning permission 12/AP/3558 dated 04/06/2013 for the 'Demolition of existing buildings and erection of a replacement building of five to eight storeys in height (max height of 27.5m), plus basement, comprising 53 residential units, 633 sqms of retail floorspace (Use Class A1) and 767 sqms of office floorspace (Use Class B1), disabled parking spaces and roof top landscaped amenity areas'. Proposed changes incorporate: - Alterations to internal floor plan layouts and core layouts. - Realignment of window and door positions to correct inaccuracies with plans. - Removal of brick pillars to balconies and provision of opaque glass balconies. - Increase in height of building by 150mm to accommodate lift overrun. - Increase in A1 floorspace from 643.2sqm to 721.9sqm. - Reduction in B1 floorspace from 670.3 to 645.64sqm. - Alteration to building line/arrangement at Ufford Street/Boundary Row junction." The non-material amendment comprises the extension of the existing plant enclosure located on the seventh floor of Block B to accommodate an additional condenser unit to support the operation of the commercial uses.

Change of use of the rear parts of lower ground and basement floor levels from retail (Class E) into a residential unit (Class C3) and conversion of the existing maisonette into 3no. self-contained flats, comprising of 2 x 1 bedroom, 1 x 2 bedroom and 1 x 3 bedroom self-contained flats; erection of a rear roof extension; erection of a rear extension at second floor level over part of the existing back addition; erection of a single storey rear extension at lower ground floor level to the side of the existing back addition; installation of 2no. rooflights in the front roofslope; re-sizing and replacement of 2no. windows to the rear elevation at upper ground floor level; removal of an existing window to the side elevation at upper ground floor level; alterations to the rear elevation at lower ground floor level to include, installation of new bi-folding doors following the demolition of external structure and the removal of existing window; erection of bike and bin stores in the rear garden.